TECHTONGDA Axial Blower Exhaust Fan 24 Inches Diameter Fume Ventilator with 16 ft/5 m Air Pipe Duct Hose Movable Nylon Casters Rubber Feet Low Noise Cylinder Fan for Spray Booth Paint 10241CFM
-
Detail
- ��High Efficiency��Our extractor fan adopts an 110V pure cupper motor with heat sinks, offering high-temperature resistance, energy efficiency, stable operation and long service life. The fan��s impeller is made from cast aluminum alloy, providing exceptional durability and efficient air movement with the airflow of 10241CFM and the full pressure of 300Pa. The large displacement fan has powerful suction with low noise.
- ��16ft/5m Air Duct Hose��The included 16ft PVC hose can be freely extended, bent, and connected with the fan or other air ducts, providing the flexibility to extend the fan��s reach. It is lightweight, portable, and resistant to high temperature, static electricity, acids, alkalis and insulated. The adjustable thick rope at both ends allows for easy connection to air outlets, ensuring a good sealing environment. The hose also features metal buckles every meter for secure positioning.
- ��Stable Operation��This axial blower is crafted from titanium steel with a sprayed coating, ensuring a sturdy build that remains stable even at high speeds.
- ��Safe and Convenient��The ventilator is fitted with dual stainless steel galvanized guards at the front and rear, safeguarding against breakage and deformation. The safety buckles on the edges of the guards control the tightening and loosening adjustments. And the height of the blowing angle of the fan can be adjusted by means of a stand. The fan also has 2 high density nylon casters and 2 rubber feet, which can move to suitable positions conveniently.
- ��Wide Application��The axial fan can be used for ventilation in general factories, warehouses, tunnels, offices, residences and other places. It can also be used for ventilation or heat dissipation in metallurgy, chemical industry, light industry, food processing, mechanical equipment and other places.
Parameters: Fan diameter:24inches(610mm)
Voltage:110V
Power:2200W
Frequency:60HZ
Maximum air volume:10241CFM (290 m3/min)
Speed:1450Rpm
Full Pressure:300Pa
Noise: 86dB (A)
Material: titanium steel
Weight:110.66lbs
Installation Instructions 1. Please check whether the fan is damaged or deformed before installation. If it is damaged or deformed, install it only after proper repair.
2. Please pay attention to check whether each part is loose when installing, and the clearance between the blade and the air duct should be uniform. The blade and the air duct should not collide.
3. The weight of the connected air pipe should not be borne by the fan duct, and it should be supported during installation.
4. Please install a protective net at the end of the fan��s air duct.
5. The fan base should be naturally connected to the foundation plane. Do not hit the base to force the connection, or the base may deform. During installation, please correct the base, pad the four feet with rubber shock absorber, maintain the horizontal position, and then tighten the anchor bolts.
6. After the installation is completed, the experiment should be carried out first. And it can be used only after the operation is normal.
-
Customer ReviewsNo comments