Home
/
TECHTONGDA 100T Crawler Pin Dismantling Machine with 110V Electric Pump, Hydraulic Track Pin Press Remover Machine, Pressing Sleeve Press Chain Integrated Equipment, Chain Repair Track Pinning Tool
TECHTONGDA 100T Crawler Pin Dismantling Machine with 110V Electric Pump, Hydraulic Track Pin Press Remover Machine, Pressing Sleeve Press Chain Integrated Equipment, Chain Repair Track Pinning Tool
-
Detail
- Multiple Function: Rated voltage:110V; Rated power:1500W; Chain Range: <50mm/1.97in; Pressure Sleeve Range:<150mm/5.91in; Screw Diameter: 40/50mm(1.57in/1.96in); Screw Length:1000mm/39.37in; Cylinder Stroke:100mm/3.937in. One machine for two purposes, efficient and fast.
- High Quality: The crawler track press machine is made of thickened steel plate, which is wear-resistant, durable, and reliable in quality. The surface is multi-layer electroplating, four degree polishing, and more smooth and beautiful.
- Copper Motor: Double acting hollow oil cylinder, fine workmanship; Stainless steel positioning sleeve, light design, precise structure, long service life. 100% copper motor have good power, to ensure long-term operation and improve the service life of the machine.
- Working Principle: Crawler pin dismantling machine for chain dismounting machine, using the principle of converting hydraulic energy into mechanical energy, is a special tool for dismantling the crawler pin of the crawler excavator. The electric pump is used as the power source to make the hydraulic jack move forward. Therefore, the pin shaft can be removed smoothly.
- Wide Application: Widely used in highway, railway, bridge, construction, coal mine and shipbuilding industries. It is a special tool for the maintenance and assembly of the crawler excavator. Does not damage the track, and can prolong the service life of the track compared to the traditional way of replacing the track. Improve replacement efficiency and reduce labor intensity.
Parameter:
Rated voltage:110V
Rated power:1500W
Size:42in*13.7in*161in&18.9in*14.9in*22in
Weight:284.17lbs+105.6lbs
Chain range:<50mm/1.97in
Pressure sleeve range:<150mm/5.91in
Screw diameter：40/50mm(1.57in/1.96in)
Screw length:1000mm/39.37in
Cylinder stroke:100mm/3.937in
Operating pressure:0-63Mpa
Pump station volume:16L
Note:There will be a little error in manual measurement.
The product pump station is equipped with a plug.
The tank should be filled with hydraulic oil, and then powered on to start, otherwise the pump station will be damaged.
The pump station needs to add 46 # or 68 # anti-wear hydraulic oil by yourself.
Item Included:(022760)
1 Set of 100T Press Sleeve and Press Chain Machine
-
Customer ReviewsNo comments