Home / Air Compressor, Heavy Duty Double Cylinders Tire Inflator, 12V Portable Air Pump with Electric Pressure Gauge Emergency Light for Truck Offroad Car Tires Automobiles Air Mattress

Air Compressor, Heavy Duty Double Cylinders Tire Inflator, 12V Portable Air Pump with Electric Pressure Gauge Emergency Light for Truck Offroad Car Tires Automobiles Air Mattress

$62
$62
Quantity
ADD TO CART
BUY IT NOW
  • Detail
    • Can Read Tire Pressure Easily On LCD Screen (The Unit Of Pressure Can Be Switch Between: PSI, BAR, KPA, Kg/cm²) And 2 LED Lights Built-in For Emergency Lighting.
    • Wide Use On Small And Medium Sized Car, Bike, Motorcycle, Sports Equipment (Note: It Cannot Be Used On Trucks, Bus Or Tires Greater Than 14 Inches )
    • Supports AC/DC Charging And Can Be Fully Charged In 1.5 Hours (Please Turn Off The Pump Before Charging)
    • Easy To Store And Carry Around With Its Compact Size And Can Be Used Anywhere To Inflate The Car Tires.
    • Preset Tire Pressure You Need (Max Is 150 PSI) And Press Power Button To Start Inflating, The pump Will Switch Off Automatically Once The Pressure Is Reached.


    Features
    LCD Backlit Screen, to show the settings, which is helpful to read pressure in the dark.
    2 Small Lights, bulit-in for evening emergency lighting, see the whole inflating process.
    More Accessories, air hose, gas nozzle, buoy needle, ball needle, charger and bag
    How To Use
    Screwing the tube into the bottom valve core (Not the DC socket)
    Press button "UNIT" to wake up inflator display (Press "UNIT" again to switch between PSI, BAR, KPA, Kg/cm²)
    Press button "+" and "-" to preset tire pressure you want.
    Press power button to start inflating.
    When the set pressure is reached, It will stop automatically.
    Press power button to turn it off when air inflation finish or before battery charging.
    Notice
    Please stop using the inflator when it becomes too hot or causes excessive noise.
    Please take a break to reuse when the tube and the cylinder get hot after longtime use.
    Please don't pull out the tube from valve core and from inflator until they are cooled down.
    Frequent Questions
    The Screen shows "Err", please press "UNIT" to active screen and then press "+" and "-" button at the same time until 3 to 4 seconds
    Turn on emergency lights, make sure you don't wake up the lcd screen, and then you can press the power button directly to turn on the small lights.
    Welcome to Mzlx store,please rest assured to buy,if you have any questions, please feel free to contact us

  • Customer Reviews
    No comments